Featured
All
SecurePoint Visitor product tour A host invites a visitor, the visitor is screened when they register and checks in at the lobby kiosk, and the front desk prints the badge. A possible match holds the visit for a reviewer, and every check-in, screening result and decision can be exported as evidence.
Overview Check-In Screening
Featured
How-to Compliance
How to read a possible match A how-to for compliance reviewers: read a case from the top. The header shows who the visitor is, who they came to see and where, and the summary line shows how many possible matches there are, on which lists, and which is closest. Compare the visitor's details with the list entry's one row at a time, check the ID document yourself, and note the list, the entry ID and the list version. Look at every other possible match before you decide: the similarity percent puts them in order, but it is not a decision. A company case reads the same way, without a date of birth.
Adjudication Screening
Host
Pre-register a visitor A host invites a visitor from Host Hub, the visitor registers on their phone and is screened when they submit, and a name that needs a closer look goes to a reviewer before the visit. At sites that require the NDA at every visit, the visitor signs it at check-in. Once cleared, the QR code arrives by email, the front desk sees the visitor under Expected Today, and the kiosk fills in their details from the invitation.
Pre-Registration Screening Check-In
Kiosk Visitor
Walk-in check-in A visitor with no invite checks in at the lobby kiosk: their photo ID fills in their name, they add their contact details, host, purpose and country of citizenship, answer the site's questions, sign the NDA if one is required and take a badge photo, and are screened before the kiosk checks them in, or, at sites with autonomous check-in, asks them to wait for their host.
Check-In Kiosk Screening
Compliance
NDAs and safety briefings Admins set one NDA and safety briefing for the whole organization, with exceptions for a site or a visit purpose, and before a change would make kiosks refuse visitors or stop asking for a step, the page names the sites it affects. Visitors acknowledge them when they register, or at check-in when the site requires them at every visit, and sign at the kiosk, on their phone, or at the desk. A badge waits until the required steps are done.
NDA Safety Briefing Check-In
Front Desk
Badges that print Admins set up a badge template for each visitor type, a print check confirms the layout fits the label, and the front desk prints the badge on a Brother QL-820NWB. At the end of the visit, the badge QR code checks the visitor out at the kiosk.
Badges Printing Checkout
Front Desk
When a check-in step is missing A badge is available once a visitor is checked in and approved. While a possible match is under review, the visitor is asked to see a staff member and the badge stays unavailable. In this visit, the visitor agreement and a photo of the ID are missing, so the badge is refused until the front desk completes them.
Badges Check-In Screening
Compliance
Evidence packs and the audit trail An admin picks a template and a date range in the Evidence Center, and SecurePoint builds a ZIP of screening results, review decisions and audit records, with a manifest that lists an SHA-256 checksum for each file. Evidence Pack History keeps each sealed pack, so a later download is the same file. The audit ledger shows who did what and when, and its CSV export comes with a checksum.
Evidence Audit
Admin Front Desk
Features you might have missed Restricted-device declarations at the kiosk and the front desk, badge photos taken on the visitor’s own phone with Detached camera mode, larger agreement text, alert emails (and text messages on plans with SMS) when a visit is held, and the overnight close of visits still open, with a summary of what closed.
Devices Kiosk Alerts
Compliance
Continuous Monitoring The employees, contractors and vendors you enroll are re-screened as often as every night. A possible match opens a case for review and sends your compliance contacts a summary email. Nothing is blocked automatically: your team records the outcome, and every run and decision is kept.
Monitoring Screening Audit
Front Desk
The front desk view One screen for the front desk: who's on site, who's waiting on a review, who's expected today and who has left. Today's pre-registered visitors are listed ahead of time and late arrivals are flagged. When a cleared visitor checks in, their host gets an email. The desk checks visitors out with the time and staff member recorded, and can revoke a visit with a reason.
Check-In Checkout Alerts
Compliance Host
Foreign-person visits When a site requires it, a visitor who lists another country of citizenship acknowledges they're a foreign national. Their host gets an email to come to the kiosk. There, the host confirms they checked the visitor's nationality on their ID, that they'll escort the visitor at all times, and that they won't share export-controlled technical data without authorization. Then the kiosk prints the badge. At check-out, the host is asked for an after-visit report.
Escort Kiosk Reports
How-to Host
How to invite a visitor A how-to for hosts: start an invite in Host Hub with the visitor's details, including their country, the visit date and time, and what the visit requires. Once the visitor registers on their phone, giving their nationality, and is screened and cleared, their QR code for the kiosk arrives by email.
Pre-Registration Host Hub
How-to Front Desk Kiosk Visitor
How to check in at the kiosk with your QR code Step by step, a visitor checks in at the lobby kiosk with the QR code from their email: they confirm the details from their invitation and add anything missing, scan a photo ID when the site asks, answer the site's questions, read an NDA to the end and sign it if one appears, watch a safety briefing if the site has one, take a badge photo if asked, and see You're checked in, or, at sites with autonomous check-in, Please wait here for your host.
Check-In Kiosk QR Code
How-to Front Desk
How to print a visitor's badge How the front desk prints a badge: open a checked-in, cleared visitor's record, finish any steps missing for the visit, check the preview, then print, and the visit record shows it was sent to print.
Badges Printing
How-to Admin Front Desk
How to record a visitor's devices Step by step: an admin turns on device declarations for a site, visitors declare their devices and where each one will be kept at the kiosk, and front desk staff can record a missing declaration from the visit record.
Devices Kiosk Check-In
How-to Admin IT/Security
How to set up badge printing How an admin sets up badge printing from the check-in tablet: put a Brother QL-820NWB on the same network as the tablet, by Ethernet if you can, with DK-2251 labels. In Admin, add the printer, choose The check-in tablet prints directly and Let the tablet find and save the printer, and get a setup code. In Kiosk Settings on the tablet, enter the code, choose the printer it finds, and tap Connect to SecurePoint. Then send a test badge: from then on, badges print from the tablet with no print window while the SecurePoint Kiosk app is open.
Printing Badges
How-to Compliance Admin
How to build an evidence pack for a past visit A how-to for compliance teams: from Reports overview, find the visitor's check-in date in Visitor audit, generate an evidence pack whose dates cover the visit, and check its files against the SHA-256 checksums in the manifest. Evidence Pack History keeps the sealed pack, so Download ZIP returns the same file later, with the same checksum.
Evidence Audit
How-to IT/Security
How to screen a name with the Screening API A how-to for developers: once SecurePoint turns on the Screening API for your organization and issues your API key, POST a name to prescreen, read the screening ID, risk level and score, possible matches and whether review is required, then GET the stored result by that ID.
Screening API Developers
How-to Front Desk Admin
How to check out at the kiosk A how-to for visitors and site admins: tap Check Out on the kiosk, scan the QR code on your badge or find your name, and confirm it's your visit. Visits still under review stay open, and other visits left open overnight are closed and marked as having no verified departure.
Checkout Kiosk
How-to Host
How to do Host Verify at the kiosk A how-to for hosts at sites with autonomous kiosk check-in: when your visitor is waiting, go to the kiosk yourself, tap Host Verify, pick your visitor, type your own name, check their photo ID and print the badge.
Host Verify Kiosk Badges
How-to Host
How to do Host Verify at the kiosk, with a host code The same Host Verify how-to for sites that send hosts a four-digit code: go to the kiosk yourself, tap Host Verify, pick your visitor, type your own name and the code from your arrival email or text, check their photo ID and print the badge.
Host Verify Kiosk Badges
How-to Host
How to check out your visitor from the end-of-day email A how-to for hosts at sites that send the end-of-day email: when a visitor of yours still shows as on site at the end of the day, tap Check out in the email, say when they left, pick a reason if asked, and confirm. The visit closes with the departure time you confirmed.
Checkout Host Hub
How-to Host
How to sign in to Host Hub A how-to for hosts: open your Host Hub invitation, create a password, bookmark Host Hub, and sign in with your email next time.
Host Hub
How-to Admin IT/Security
How to set up a lobby kiosk A how-to for admins: in Admin, open Kiosks, name the tablet and pick its site, generate a pairing code, then open /kiosk/setup on the tablet in Safari, Chrome or Edge, enter the code and tap Pair tablet, and delete a tablet you replace or retire to revoke its access.
Kiosk Setup
How-to Compliance
How to work the Adjudication Queue A how-to for compliance reviewers: in the Compliance menu, open the Adjudication Queue. Visitor check-ins are people at your sites, and Screening reviews are names screened without a visit. Needs decision counts everything waiting on someone, the last three tiles count the decisions of the last 30 days, and anything that needs attention, such as an escalation, shows as a chip under the counts. A check-in from the last twelve hours is listed first, and a row marked Screening not finished keeps its visitor on hold. Select Assign to me so other reviewers see you have the case, then open it.
Adjudication Screening
How-to Compliance
How to clear a case that is not the listed person A how-to for compliance reviewers: when the closest match has a different date of birth, compare it with the visitor's ID, then choose Not a Match. On a strong match the program asks why, so choose the reason, and write a note that says what you compared and what was different. Confirm Decision saves your name, your role and the time. Not a Match clears the list match only: the host still confirms the visitor before a badge prints.
Adjudication Screening
How-to Compliance Admin
When the details match: senior review or deny access A how-to for compliance reviewers: when the date of birth and the country match the list entry and the name is nearly the same, don't clear the case on a hunch. For a match this strong, Not a Match needs a different date of birth or ID document, or a second reviewer. If you're not sure, choose Send for Senior Review with a reason and a note, and your organization's compliance admins get an email. If you're sure it's the listed person, choose Deny Access: access is refused and no badge prints. SecurePoint records the decision; it does not file reports for you.
Adjudication Screening
How-to Compliance
How to run a screening again when it did not finish A how-to for compliance reviewers: sometimes a screening does not finish, for example when a list could not be searched in time. An unfinished screening is not a clean result, so the visitor stays on hold and the case cannot be cleared. Open the case, select Run screening again, and read the new result the same way as any case before you record your decision. You can still deny the case or send it for senior review without running it again.
Adjudication Screening
How-to Compliance Admin
How to find a past decision and who made it A how-to for compliance staff: open Reports overview, then Adjudication SLA, choose a date range and open the case from its row. The Case closed panel shows the decision, the reason, who recorded it and when, and the comparison shows the list, the entry and the list version used for that screening. Evidence and Timeline lists every decision on the case with the reviewer's name, role and note, and each decision has its own row in the System audit ledger under Audit logs. Audit records can't be edited or deleted.
Adjudication Audit Reports
How-to Front Desk Compliance
Front desk: when a visitor is on hold A how-to for front desk staff: a held visitor's row says On hold, security review. Not checked in. Do not issue a badge. Ask the visitor to take a seat, open the visitor to see the next step, and select Notify Host so the host knows the visitor has arrived. The badge button stays off until the visitor is approved, and the row changes when compliance decides.
Check-In Adjudication
How-to Admin Compliance
How to set up NDA and safety documents A how-to for org admins and compliance managers: in Admin, under Compliance, open NDA and safety and select Set up the default NDA, which is used at every site unless you add an exception. It starts with a sample NDA for your counsel to review: give it a title that says NDA and paste in your agreement text, and What the kiosk shows previews it. Tick Show visitors the safety video, then paste a YouTube link or upload an MP4 or WebM file, and select Save. Check what a visitor gets shows what a visitor at a site signs and is shown. At the kiosk, visitors sign the NDA and then acknowledge the safety briefing, a QR code check-in skips whichever they finished while registering unless the site requires them at every visit, and both are saved with the visit.
NDA Safety Briefing Setup
How-to Compliance Admin
How to find a past visit and export the visitor list A how-to for compliance, security and audit staff: in Reports Overview, open Visitor audit, where each row is one visit. Search by name, email or company, or filter by host, and open a row for its purpose, check-in and check-out times, host and screening decision. To export, clear the search and any filters and pick the date range you need, then select Export CSV and Download: the file has a row for each visit, with times in UTC. Auditor accounts can search and open visits; by default, only org admins and compliance managers can export.
Reports Audit Export
How-to Front Desk
How to finish missing check-in steps at the desk A how-to for front desk staff: open the visitor's record, where Missing for this visit lists what's left. Have the visitor sign the NDA and watch the safety briefing, at the desk or on their own phone. Capture a headshot for the badge and, if you have ID Vault, the front of their ID. When nothing is missing for a cleared visitor, select Badge to open the preview.
Check-In NDA Badges
How-to Host
How to check your invites and re-invite a visitor A how-to for hosts: in Host Hub, open the Visitors tab and read each visitor's tag. Invite sent means they haven't registered yet, Cleared means they've registered and passed screening, and Under security review means your security team is reviewing them. If a link has expired or the visitor is coming again, select Re-invite, pick the new date and start time, and Create Invite. Your visitor is emailed a new invite with a new link, or you see Email not sent if sending fails, and your earlier invite stays as it was.
Pre-Registration Host Hub
How-to Admin Compliance
How to add hosts and send Host Hub invites A how-to for org admins and compliance managers: in Admin, open Hosts, select Add Host, enter a full name and email, pick their site, keep Send invite email automatically ticked and select Create Host, and the host is emailed a link to Host Hub. To add many hosts at once, select Bulk Upload with a CSV file that has a full name and email on each row, tick Send invite emails to newly created hosts, select Import Hosts, and check the summary for any row it skipped or couldn't email.
Host Hub Setup
How-to Compliance Admin
How to review a Continuous Monitoring hit A how-to for compliance managers: when a run flags a possible match, open the Continuous Monitoring add-on under Compliance, then Hits. Open the hit, compare the name screened with the listed party, choose a reason code and add a note if asked. Select False Positive if it's someone else; Needs More Info and Escalate keep it open. Block, once you confirm it, marks the linked review case as denied. No decision here changes anyone's badge or system access, and the audit trail records your decision with your reason code.
Monitoring Screening Audit
How-to Front Desk
How to choose between Check Out and Revoke A how-to for front desk staff: on the Front Desk Dashboard, Check out and Revoke look alike but do different jobs. When a visit ends normally, select Check out, pick a reason and confirm, and the time and who did it are recorded. To remove someone, select Revoke, which is not an early check-out: give a short reason with no names and select Revoke Access, and the visit ends with the visitor recorded as denied. Recent activity shows Out for a check-out and Revoked for a revoke.
Checkout Check-In
How-to Admin Compliance
How to set up and assign a badge template A how-to for org admins and compliance managers: in Admin, open Badges and duplicate the template closest to what you need. In Quick Edit, name it, choose what the badge shows and set text sizes, or switch to Advanced Design for exact positions and sizes. Try a long sample name, check that Preflight says Ready, and save. Org admins then choose it for a visitor type in Badge assignments; nothing is live until Review Changes, then Apply Assignments. What Will Actually Print shows which template each site prints, and the front desk's badge preview for that visitor type shows the same template.
Badges Setup
How-to Kiosk Visitor Host
How to register for your visit A how-to for visitors: open your invitation email and select Complete Pre-Registration. Check your name and email, add your phone number and date of birth, and choose your nationality, which is required and used in screening. Add your company, and a photo of the front of your ID if it's asked for. If an agreement appears, read it to the end and type your name to sign; some sites have you sign it at check-in instead. Select Complete Registration. Once you're cleared, your QR code appears and arrives by email, so bring it and your ID on the day.
Pre-Registration Screening QR Code
How-to Front Desk Compliance
How to hold a visitor at the desk A how-to for front desk staff: when an arrival still needs checking, like a visitor waiting for an escort, the Front Desk Dashboard shows Entry validation required. Check the visitor against their ID and the details on screen, assign an escort first if one is needed, and select Admit visitor if everything matches. If something's wrong, choose a reason under Hold for compliance review, add a note for compliance, which is required when the reason is Other, and select Hold for compliance review. The visitor isn't admitted, and the visit goes to the Adjudication queue, where compliance decides. Only compliance can deny entry.
Check-In Adjudication
How-to Compliance Admin
How to export the physical access register A how-to for compliance teams: open Reports, then Evidence Packs, and choose the CMMC L2 PE Visitor Evidence template and the dates and sites to cover. Leave PII redacted for an outside assessor, then generate the pack. In the ZIP, the physical access register has one row per visit: check-in and check-out times, host, site, and whether an escort was required and recorded. Escort gap flags a visit that needed an escort with none recorded, and departure verified shows whether anyone saw the visitor leave. The manifest lists an SHA-256 checksum for each file, and Evidence Pack History keeps the sealed ZIP.
Evidence Audit Export
How-to IT/Security Front Desk Compliance Admin
How to set up two-factor sign-in A how-to for staff who sign in with a password: open your account menu at the top right, select Security & MFA, then Enable 2FA. In an authenticator app like Microsoft Authenticator or Duo Mobile, add an account and scan the QR code, or type the key shown below it. Enter the six-digit code from the app and select Verify & Enable, and two-factor authentication shows Enabled. If your organization requires it, you enter a code from the app each time you sign in with your password.
Security Sign-In
How-to Host Compliance
How to file an after-visit report A how-to for hosts: when your visitor checks out, you may get an email asking for an After Visit Report. Select Complete After Visit Report; you don't need to sign in. Answer the two questions, which both start on No. If you shared controlled technology or technical data, choose Yes, describe what was shared, and add the ECCN or category if you know it. If you discussed pricing or commercial terms, choose Yes and summarize them. Write a short meeting summary and select Submit report. Once it's filed, you see Thanks; until you file it, you get email reminders.
Reports Checkout
How-to Admin
How to invite staff users A how-to for org admins and site managers: in Admin, open Users and select Add user. Enter the person's email address and pick their role, like Front Desk; for front desk staff, pick the site they work at. Select Create user, and they're emailed an invitation with a link to the video guide for their role. Until they accept, they're listed under Pending invitations, where you can resend or delete the invitation.
Setup Users
How-to Admin IT/Security
How to require two-factor sign-in for your organization A how-to for org admins: in Admin, open Security settings. Under MFA sign-in enforcement, tick Require MFA at sign-in, then choose who enters a code: org admins and compliance managers, or everyone. Select Save Changes in the bar at the bottom of the page. From then on, the people you chose enter a code from their authenticator app each time they sign in, before they reach the dashboard, and anyone who hasn't set one up is sent to do that first. That includes you: if you haven't entered your code since you signed in, you're asked for it as soon as you save. Kiosks and Host Hub aren't affected, and accounts set up through Microsoft sign-in keep using your Microsoft tenant's MFA.
Security Sign-In Setup
How-to Admin
How to set a site's security profile A how-to for org admins: in Admin, open Sites and select the pencil on the site's card. Under Security compliance profile, change Normal to ITAR Controlled, then select Save changes, and the site's card shows the ITAR badge. From the next check-in at that site, every visitor needs a host, and kiosk visitors scan their ID during check-in, even if they registered one beforehand. By default, only org admins can change a site's profile, and ITAR Controlled is available once SecurePoint turns ITAR on for your organization.
Security Setup Check-In
How-to Compliance Admin
How to import a roster into Continuous Monitoring A how-to for compliance teams: under Compliance, open the Continuous Monitoring add-on and select Imports. Download the example CSV for the columns: a name is required, and an ID keeps re-imports matched to the same person. Choose your file and pick what the records are: employees, contractors or vendors. Keep the default import mode, which adds and updates people and leaves everyone else alone, and select Preview import. When the preview shows no warnings or errors, select Commit import. Your people then appear in Monitored Parties, re-screened on your organization's schedule, or right away with Rescreen now. Make sure a policy is enabled on the Policies tab, or no runs are recorded.
Monitoring Screening Setup
How-to Front Desk
How to check in a walk-in at the desk A how-to for front desk staff: on the Front Desk Dashboard, select New check-in. Hold the visitor's ID up to the camera and select Capture Front, then turn it over and select Capture Back, and their name fills in from the ID. Add their company and mobile number, check their country, then choose the host and the purpose of the visit. Take their headshot for the badge. If an agreement appears, choose whether the visitor signs on their phone or at the desk. SecurePoint screens them: at Check-in Complete, select Print Badge. When it comes out, select Yes, it printed; if not, select Print again. If it says Under review, compliance decides before a badge prints.
Check-In Screening Badges
How-to Front Desk Admin
How to complete Host Verify at the desk A how-to for front desk staff at sites that use autonomous check-in: a visitor who checks in at the kiosk waits there for their host, and their row on the Front Desk Dashboard says Waiting for host verification. When the visitor is at your desk, select Complete host verify. Type the host's name, check the visitor's photo ID, tick both boxes, and select Complete host verification. If nothing else is holding the visit, they're checked in, and you print their badge from their record.
Host Verify Check-In Kiosk
How-to Front Desk
How to notify a visitor's host from the desk A how-to for front desk staff: if a host hasn't come to meet their visitor, send them an arrival email with a note. On the Front Desk Dashboard, open the visitor's record. Next to the host's name, select Notify Host; the host's name and email are filled in from the visit. Add a message, like where the visitor is waiting, and select Send Notification. The host gets an arrival email with the visitor's name, the site and the time, and your message under Front desk note.
Check-In Alerts
How-to Admin IT/Security
How to set up the SecurePoint Kiosk app A how-to for admins and site managers: install SecurePoint Kiosk on an iPad or Android tablet from the App Store or Google Play and open it. An Android tablet asks for the camera and to pin the app. The app's short setup guide ends with agreeing to the terms. Then, in Admin, open Kiosks, name the tablet, pick its site and generate a pairing code, and type the code on the tablet or scan its QR code to open the kiosk welcome screen. On an iPad, Guided Access keeps visitors in the kiosk. Staff settings sit behind a PIN, opened from the top-right corner, and the first PIN is 1234.
Kiosk Setup
How-to Admin Front Desk
How to use Kiosk Settings on the tablet A how-to for admins, site managers and the front desk: on a tablet running the SecurePoint Kiosk app, tap the top-right corner five times and enter the settings PIN. Change the PIN from 1234 under Settings PIN, check the badge printer and print a test label, tap Reload check-in page if check-in looks stuck, and copy Diagnostics for SecurePoint support. On an Android tablet, Leave the kiosk app lets staff use the tablet for something else.
Kiosk Printing Setup
How-to Host
How to reprint a lost badge at the kiosk A how-to for hosts at sites with autonomous kiosk check-in: when your visitor has lost their badge, tap Host Verify at the kiosk, then Reprint a Badge, pick your visitor and send yourself a one-time code. Check it's your visitor, enter the code, choose why you need a new badge, and print it. The new badge is marked as a reprint, and choosing Badge lost also alerts your compliance contacts.
Host Verify Kiosk Badges
Admin Host
Kiosk autonomous mode In autonomous check-in, visitors check themselves in at the lobby kiosk, and Host Verify finishes the visit there. Admins turn it on for the whole organization in Admin, Kiosks, or for one site in Admin, Sites. Once a visitor is cleared, the kiosk asks them to wait for their host, who gets an arrival email, and a text on plans with SMS, to come to the kiosk, with a four-digit code when the host code is on. At the kiosk, the host taps Host Verify, picks their visitor, types their own name and any code, checks the photo ID, ticks both boxes and prints the badge. A visitor still in compliance review can't be picked, and the visit keeps the typed name and whether the host used the code.
Kiosk Host Verify Check-In